How to Distress Furniture - Step by Step Guide

How to Distress Furniture - Step by Step Guide

Furniture - How to Distress Furniture - Step by Step Guide

Hello everybody. Yesterday, I discovered Furniture - How to Distress Furniture - Step by Step Guide. Which is very helpful to me so you.

For a unique look, many homeowners are mixing distressed furniture with current contemporary styles.

What I said. It isn't the conclusion that the actual about Furniture. You check this out article for information about what you need to know is Furniture.


Before you go throwing away your old dining room or bedroom sets, reconsider by refinishing it. Distressed furniture can be very expensive to buy so why not originate it yourself with a microscopic imagination and some Tlc. This step by step guide will give you some helpful tips that the pros use when distressing furniture.

1. Sand: Sand down the desist on your piece so the primer/paint has something to adhere to. Use medium/fine grit sandpaper for this.

2. Rough up surface: Take a few tools (hammer, screw driver, chain, etc.) and rough up the exterior of the piece. This is left up to your discretion of how distressed you want to make the furniture. The more you rough up the exterior the more aged the piece appears.

3.Prime: Use a good capability white primer and give the piece of furniture a thin coat. After the piece has dried, follow up with a light sanding.

4. Top coat: Pick a top coat that complements the room. If you want to stay neutral, then go with whites/off whites. Apply two even coats of this top coat. Sometimes, homeowners will request a crackle desist in which the top coat appears as if the paint has dried and is beginning to chip away. For a crackle desist read the steps below:

a. follow steps 1-3.

b. elective Base coat: Get Creative!! If you do not want the piece to show white crackle from primer coat, then now is the time to be creative. You can apply a distinct base coat which will show behind the top coat when the crackle takes effect.

c. Apply crackle glaze where you want the top coat to crackle. Allow to dry agreeing to directions on package. This is usually a clear glaze sold at your local home center.

d. Top Coat: Apply top coat evenly (try not to over brush which may cause paint to drag). This top coat should be a distinct shade then the primer/base coat to make the crackle stand out.

e. Continue the follow steps below.

5. elective Glaze coat: After the piece has completely dried, apply a glaze over the whole piece. This step is elective but recommended. This glaze (usually dark brown/grey) when applied, highlights all of the roughed up areas (step 2) and of course brings out the details in the piece. The best way to apply the glaze, is with a brush and then wipe off the excess with a rag. Wipe with even pressure (in one direction).

6. Apply a seal coat: Water based Poly works good for this. Apply 2-3 thin coats of this stock agreeing to the manufacturer's suggestion and do not forget to sand in between coats. This step will protect all of your hard work.

Now step back and enjoy your newly antiqued furniture. You will be amazed at the results and how quick and easy you have changed the look of your room. Take your time & most importantly be creative with this!!

I hope you get new knowledge about Furniture. Where you possibly can put to easy use in your life. And most of all, your reaction is passed about Furniture. Read more.. How to Distress Furniture - Step by Step Guide.
Follow me @ Spring Valley Vitamins,My delicious,My Digg,My folkd,My feeds

No comments:

Post a Comment